Delivery & Installation

Fitted Properly, Finished Beautifully


Who turns up, what they do, what is included in the price and what is not. Set out before you order rather than discovered afterwards.

Rated Excellent on Trustpilot

Three Ways We Work

Replacement, Prepared Opening, or Supply Only


Almost every installation is one of two things. A replacement is what most people have: your existing windows and doors come out, ours go in, and we make good around them.

A prepared opening is a new build or an extension, where a builder has formed the openings and we install into them. The work is narrower, and what is expected of the site is much more specific.

Supply only is the third option: we make and deliver, and your own builder or joiner fits. It is available on every range we sell, and it changes who is responsible for what, the scope is set out below.

All three have different scopes and different prices, so it is worth knowing which one you are before you read any further.

A close-up of a finished window installation

The Scope

What the Price Covers


Taken word for word from the scope documents that go out with every quotation.

Replacement

Supply & install

Included

  • Site survey to confirm sizes and product details before the order is placed
  • Removal of your existing windows and doors
  • Disposal of all removed units and waste
  • Supply and installation of the new timber, uPVC or aluminium units
  • Making good the structure around the opening, brickwork, render and plastered reveals disturbed during installation
  • Internal and external timber trims where specified: architraves, liners and window boards
  • Sealing and weathering every external joint to the new frames
  • Removal and refitting of existing shutter blinds where present
  • Removal of installation debris on completion

Not included

  • Decoration of internal walls and plaster reveals
  • Decoration of external render, the render itself is made good, the painted finish is not
  • Structural alterations beyond making good the existing opening
  • Electrical, alarm or blind alterations at the openings
  • Re-routing of services concealed within walls

The survey always comes first. Our surveyor records the manufacturing sizes and picks up any structural details before the order goes into production. We repair what the installation disturbs, repointing, plastered reveals, external render, and seal the new frames. Lintels and cill details are not replaced unless that is agreed when you order, and decoration of the repaired areas is not included.

Prepared Openings

New build & extensions

Included

  • Survey or site meeting to confirm manufacturing and opening sizes before production
  • Positioning and securing each unit into the structural opening
  • Packing, fixing and levelling
  • Perimeter sealing inside and out with fire-rated foam

Not included

  • Architraves, internal liners and window boards
  • Plastering and plaster making good
  • Decorative and external finishing trims
  • Structural alterations
  • Adjustments to surrounding carpentry
  • Redecoration

Openings must be ready. Pricing assumes one continuous visit into openings that are structurally complete, square, plumb, level and within normal construction tolerances. Where a second visit is needed because the openings are not ready, access is restricted or dimensions are wrong, an additional or abortive visit is charged at £750 + VAT per day.

Supply Only

Delivered, not fitted

Included

  • Made to the sizes you give us, to the same specification as a fitted order
  • Available across every range, timber, uPVC, aluminium and steel-look
  • Fully factory finished in your chosen colour
  • Glazed, with all hardware fitted, handles, hinges, locks and stays
  • Delivered to site, included in the price
  • The full product warranties, exactly as on a fitted order
  • Care instructions and our site care guidance
  • A survey instead, if you would rather we took the sizes, ask and we will quote it

Not included

  • Installation, removal, disposal, fitting, sealing and making good
  • The ten-year installation warranty, which covers work by our own teams
  • Architraves, liners, window boards and external trims, normally by others, though we can supply them on request
  • Responsibility for the manufacturing sizes, which stays with you

The sizes are the one thing to get right. On a supply-only order we make to the sizes you give us, so they are yours to confirm, including whatever tolerance your installer wants for packing and sealing. If you would rather we took them, ask for a survey when you enquire and we will quote it. Everything else is the same as a fitted order: the same joinery, the same finish, the same glass and the same hardware.

The Finish

Finished Like Joinery, Not Just Fitted


Most window companies run a bead of silicone round the frame and leave. The finish is the part of an installation you look at every day, and it is where we are most different from other installers. Every joint, inside and out, is sealed with a paintable product so that when the decorator has been, the window reads as part of the room rather than something that was put into it.

Photo to follow

Outside

Soudal Fix All, Not Silicone

Every external joint between the new frame and the brickwork or render is sealed with Soudal Fix All, a hybrid-polymer sealant, rather than silicone. It bonds to masonry, render and timber, stays flexible, does not shrink or yellow, and can be painted over, so there is no grey line of mastic around the frame.

Photo to follow

Inside

Caulked Ready for Paint

Architraves, liners and trims are caulked with a paintable decorator’s caulk along every junction, so there are no gaps or shadow lines for your decorator to chase. Everything is closed up and ready for a first coat the day we leave.

Photo to follow

No trims

Replastered and Made Good

If you would rather have no trims at all, we replaster the reveals and make good, leaving a clean, flat surface ready for decoration. A simpler look that suits modern interiors and plain plastered reveals.

Trim Packs

Choose how the inside is finished. Where trims are wanted we offer a range of trim packs, agreed at survey and priced with your quotation, so the internal finish is decided before the order goes into production rather than on the day.

Watch an installation on YouTube →

  • Cover strip finishing, a slim cover strip to close the frame to the plaster
  • Architrave and liner pack, full timber liners and architraves, primed and ready for paint
  • New window boards, replaced to match the new frames and liners

Before We Arrive

Ready to Receive


For a prepared-opening job, these five need to be true on the day. If any of them is not, tell us early, moving a date costs nothing, a wasted visit does.

01

Openings finished to the final structural size agreed

02

No further structural works required

03

Clear access provided

04

Scaffolding erected and certified, if it is needed

05

Site clean and safe to work in

A cottage with white painted timber windows after installation

While You Wait

Looking After It On Site


If your order is delivered before it is fitted, or there is building work going on around it, factory-finished joinery needs a little care. Most of the damage we see on site could have been avoided in a minute.

  • Cover with breathable materials only, polythene traps moisture against the finish
  • Use a low-tack tape, test it somewhere discreet, and take it off the same day
  • Store off the ground on bearers, covered, dry and well ventilated
  • Keep it out of metal site containers, which sweat and overheat
  • Let plaster, render and screed dry out before we install
  • Wash off any splashes at once with mild detergent and clean water
A timber entrance door and flanking windows

On the Day

How the Work Runs


Our installers work from the first floor down. If you would rather they started with particular rooms, say so and we will bring those products on the first day; once the team is on site you can agree the order of the rest with them directly.

  • Dust sheets down while they work, and a tidy up at the end of each day
  • Clear the area around the windows and doors if you can, and take down curtains and blinds
  • They will help with the heavier furniture
  • Tell us about pets, parking restrictions and anything else we should know
  • Somewhere to store the products, a garage, or room for a Luton van, helps a great deal

Who

Our Own Teams


Every installation is overseen by Steve Hume and carried out by our own fitters, not subcontracted out. Where we install, the workmanship carries a ten-year warranty covering installation defects, water ingress caused by the installation and incorrect fitting.

On a supply-only order your own installer takes it from there. The product warranties still apply in full; the ten-year installation warranty does not, because it covers our own work. What supply only covers.

Two of our installers fitting a timber casement window
Inside our Leigh-on-Sea showroom

See the Quality for Yourself


Visit one of our five Essex showrooms, or send us your plans and we will prepare a detailed quotation.